Gondola Fixture Installation

GENERAL
1) Contact the local building department prior to starting installation to check on any restrictions.
2) Only parts and accessories produced or supplied by Madix are covered by Madix warranty.
3) Installation sequence must be followed exactly for assembly and leveling.
4) Under no circumstances should damaged parts be used.
5) Do not use shelving parts or accessories for any purpose other than originally intended.
6) Installation instructions with product load ratings are included with each order and must be followed carefully.
7) Merchandisers must be made aware of possible overloading as specified in load ratings. If you do not receive
these, please contact your sales or customer service representative.
8) Initial installation or relocation of Madix gondola or wall fixtures should be supervised exclusively by qualified
personnel.
GONDOLA /WALL SHELVING
9) Never install shelves or accessories into the side of an upright that has no base shoes on that side.
10) Be sure all shelving parts or accessories are completely seated in slotting or perforations.
11) Do not permit climbing or standing on shelving at any time...especially base shelves.
12) Do not attempt to relocate merchandised shelves or accessories.
13) Never try to move completed fixtures, especially if merchandised.
14) No shelves or accessories should project past the front of the base shelf.
15) Base end covers and upright end covers must always be installed at the end of a run.
16) All displayers at a gondola end must have a base shelf, metal end flat or other type of flat to prevent collisions
with any upper shelves or accessories, if these are to be installed.

Call one of our sales reps at (800) 842-5501

Shelf Loading Capacity

This Category: Display Systems : Gondolas Metal Store Fixtures : Golf Display Racks  : Metal Store Fixture Display  : Mini Ladder Display : Chain Link  : Wall hardware